Line 1 of 4 · Structure & Shell

Structure & shell.

The parts that make a building stand up and close in: structural insulated panels cut to your shop drawings, OSB sheathing and drywall panels by the truckload. Aluminium framing and architectural panels ship alongside from our sister brand.

Products

What we source in this line.

Typical options across our partner network — confirmed per RFQ. Ranges are typical, not limits; send your spec.

Structure & Shell · 1 of 3

SIPs — structural insulated panels

A rigid foam core bonded between two OSB skins makes a wall, roof or floor panel that is structure, sheathing and insulation in one piece. Panels arrive cut to your shop drawings, with openings, chases and bevels done at the factory, so a crew can dry in a shell in days.

Quote SIPs
Typical options across our partner network — confirmed per RFQ.
CoreEPS standard; XPS, polyurethane (PUR) and polyisocyanurate (PIR) on request
FacingsOSB both faces as standard; other facings by project
Panel thickness4½ in to 12¼ in, wall and roof profiles
Panel sizes4 × 8 ft up to 8 × 24 ft, project-dependent
FabricationOpenings, electrical chases and bevels factory-cut to shop drawings
ConnectionsSurface, block and lumber splines; sealant and tape packages
UsesExterior walls, roofs, floors over crawlspace

Structure & Shell · 2 of 3

OSB — oriented strand board

Cross-oriented wood strands pressed with resin into a strong, consistent panel for wall and roof sheathing, subfloors and SIP skins. We source by the truckload with grade stamps to the standard your project calls for.

Quote OSB
Typical options across our partner network — confirmed per RFQ.
Thickness¼ in to 1⅛ in (6–28 mm)
Sheet size4 × 8 ft standard (1220 × 2440 mm); 4 × 9 and 4 × 10 ft on request
EdgesSquare edge, or tongue-and-groove for floors
GradesSheathing and structural panels rated to the standard your project specifies (e.g. PS 2 in the US)
SurfaceSanded or unsanded; overlays and radiant-barrier facings on request

Structure & Shell · 3 of 3

Drywall panels

Gypsum board for walls and ceilings, from standard residential panels to fire-rated, moisture- and mould-resistant boards for commercial and multifamily work, shipped with the compound, tape and bead to finish it.

Quote Drywall panels
Typical options across our partner network — confirmed per RFQ.
Thickness¼, ⅜, ½ and ⅝ in
Size4 ft wide × 8 to 16 ft long
TypesRegular, moisture-resistant, mould-resistant, fire-rated Type X, abuse-resistant, ceiling board
EdgesTapered, square or beveled
AccessoriesJoint compound, tape, corner bead and screws, bundled per BOM

Why panelise the shell

A faster, tighter shell.

  • Faster dry-in

    Factory-cut panels go up quickly, which gets the roof on and interior trades started sooner.

  • Fewer pieces on site

    One panel replaces studs, sheathing and cavity insulation, so there is less to cut, carry and waste.

  • A tighter envelope

    Continuous foam and fewer joints make it easier to hit air-tightness and energy targets.

  • Predictable quality

    Panels are cut by machine to your drawings and inspected before they ship.

Also on this BOM

Ship it together.

Aluminium framing, architectural aluminium panels, doors, windows and frames come from Titan Metal Works; glass from Glassify. We ship them with your structure order.

Complete the project

Nearshored

Made closer to your site.

Wherever this line can be made in Mexico or Latin America, that's where we start: days by truck, USMCA for qualifying goods, factories in your time zone, and White Lion handling the border. Where Asia is the better source, we say so.

How the process works

Send the BOM. We’ll find the factory.

Drawings, a takeoff, a spec sheet or a rough list of quantities — any of it is enough to start. We sign an NDA before detailed project discussion and reply with questions, sourcing options and a delivery plan.

Request a quote

Or call Provo, Utah · Mon–Fri 9:00–17:00+1 (385) 337-4045

Emailinfo@whitelionprocurement.com

Previous Product lines Sheet 06 / 10